Korenix USA is proud to announce the release of the JetNet 6524G Industrial 24-Port Gigabit Stackable Layer 3 Managed Ethernet Switch The JetNet 6524G is a 19-inch Gigabit Stackable Layer 3 Industrial Managed Ethernet Switch, equipped with 24 10/100/1000 Base-TX ports, including 4 Gigabit SFP combo ports delivering maximum throughput and flexibility for high-density and ultra high-speed connection.With stacking cable installation, up to 8 units can be stacked together, allowing building a single-IP manageable device and simultaneously providing 40G backplane across full duplex stacking links. The flexible interface design allows JetNet 6524G to provide up to 192 Gigabit ports
cheap p90x per stack and 384G bandwidth for building intelligent largescale networks. In addition to the 90-264VAC power-based JetNet 6524G model, Korenix provides the JetNet 6524GDC series, which support 24V or 48V power inputs and feature a FAN-less design with -40~65oC wide operating temperature for severe industrial applications..
Easy Stack ManagementThe simplified stack management interface of JetNet 6524G allows users to manage up to 192 ports of the
insanity exercise program switches through single console interface or remotely manage them through single IP address. Besides, administrators can benefit from the stacking interface by easily configuring the precedence of each stack member. By assigning different precedence to different stack members, users can choose themanagement (Master) unit of the stack. If a stack member's precedence
insanity asylum workouts is assigned to be disabled,this stack member will always be a slave unit.Layer 3 Routing The JetNet 6524G IP routing layer contains the IP forwarding layer, Address Resolution Protocol (ARP) mapping layer and Routing Tables. With IP forwarding table, the JetNet 6524G provides wire speed IP and VLAN inter-routing. A single JetNet 6524G allows users to configure multiple IP subnets and assign them to the physical interface.The routing table can be updated according to the routing information defined by configured static route or learnt by dynamic Routing Protocols. The dynamic Routing Protocols supported by JetNet 6524G are RIPv1, v2, OSPFv1 and V2.
Aiming to route multicast streams such as movies, videos, Industrial Ethernet Automation streams through different subnets, in addition to IP and VLAN routing, the dynamic multicast routing protocols, such as PIM-DM and PIM-SM, DVMRP , IGMP v1/v2/v3, are needed.Korenix JetNet 6524G outstands from other layer 3 switches by its multicast routing feature. With IGMP snooping and IGMP router port
cheap insanity workout selection protocols, the JetNet 6524G acts as an access level switch or aggregated switch, so that the clients can be divided into different subnets for wire speed routing and for exchanging routing information with other L3 routers/switches. Key Features:24-port 10/100/1000 BaseT ports with 4 Gigabit SFP combo ports 2 10G backplane for stacking up to 8 units with 192 ports and 384G bandwidthSupports IP, VLAN & Multicast routingIP Routing protocol supports RIP v1v2, OSPF v1/v2Supports L3 Multicast, PIM-DM and PIM-SM, DVMRP, IGMP v1/v2/v3Virtual Redundant Router
p90x2 dvd Protocol (VRRP) for gateway redundancySupports LLDP and JetView Pro i2NMS for network auto topology visualization and efficient
p90x sale group managementMultiple Super Ring member mode802.1s Multiple Spanning Tree Protocol and 802.1w RSTP for network redundancySupports 512 VLANs, GVRP/GMRP, protocol VLAN802.3ad LACP, up to 6 trunk groups, unicast and multicast load balanceSupports L2L3L4 ACL (access control list)IEEE 802.1x Port-Based Authentication, RADIUS and TACACS client, SSH, SSL, TLS, Port bindingFAN-less design with -40~65oC wide operating temperature (JetNet 6524G-DC)
相关的主题文章:
P90X: Tony Horton's 90-Day Extreme Home Fitness Workout DVD
Chat Sentinela
