Automatic intermittent rotary motion in general form in the center of the turntable unit, installation 6-14 rpm rotation, 8 times per revolution, stay a short time, transported to the capsule filling machine turret turret of all the stations at each station a short time to stay , broadcast capsule, sub-sac, filling, eliminating automatic garbage bags at the same time, lock bags, bags, cleaning mold and other services.
Steps
1, press the green button in the "power switch" power.
2, slowly adjust the "vibration strength adjustment knob" clockwise rotation, which is "vibration support" the United Nations as the vibration plate finishing first, hand-to-order plates, seat of your pants to adjust the vibration intensity to a certain time.
3, will be installed into the capsule shell powder, "Pharmaceutical Machines shell finishing panels installed" about 300 or so in each place.
michael kora handbag outlet Into the
michael kora clearance "capsule cap sorting disc" capsule cap, about 300 or so. Finishing the disc under the top with plexiglass plate small funnel-shaped, the hole diameter and the corresponding number of digital capsule diameter bored hole. At this time capsule shell stability of vibration table plate to move slowly into the hole from the particle board stand.
4, about 30 seconds, the capsule shell powder, capsule caps that fall into the hole, open. In the case of individuals opening down, capsules can be set to gently press the cap can be set out.
5, the handheld devices to access the capsule shell level (drawn at the end of this figure, like a circular plate with random), in the wholeGently push the internal management of the lower plate, finishing powder, capsule shells fell on the installation disk to disk hole, then remove the access panel. The same method, remove the Capsule capsule cap plate cap.
6, can be prepared in advance of the base area of 500 × 500 mm, four of about 10mm square plate powder height, both sides of the
michael kor outlet stores built-in powder, capsule shell powder will be installed in the side access panel plate powder level. Plexiglass box, and then randomly assigned to take cover
michael kor outlet storev load powder capsules with powder into the box, a shovel, scraping the border, you can take the powder, and scrape off the excess powder.
7 and the capsule cap plate (diagram drawn for panel hole side), then the board in the capsule cap
michael kora hand bags outlet random set, where the holes for placement. Flip board cover capsule, opening down the capsule, a set of equipment has been installed in the capsule shell pink, access panel, easy to have a bit nesting holes.
8, the capsule will be nested into the "capsule cap molding board" plate and cavity, the hand pull down, "it" and put in place, do not care too much force, because the positioning mechanism under the control of pressure altitude. Remove the cover plate joint capsule,
michael kor outlets stores into the blister packing machine completed. To cycle the next board.
相关的主题文章:
michael kors outlet malls Cheap Michael Kors Handb
Chat Sentinela
